0x0001 Binary Options

Any wildcard modifier (similar to *) that passes along Ctrl, Alt, Shift modifiers?

I would like to, say, let Win+Z perform a left click, with the Ctrl, Shift, Alt modifiers passed along. Therefore Win+Ctrl+Z would perform Ctrl+click, etc.
I tried the * modifier. It only triggers the hotkey with the modifier, but not passing them along with the left click. So I'm currently using a whole chunk of code:
#z::Send {LButton} ^#z::Send ^{LButton} !#z::Send !{LButton} +#z::Send +{LButton} ^!#z::Send ^!{LButton} ^+#z::Send ^+{LButton} !+#z::Send !+{LButton} ^!+#z::Send ^!+{LButton}
This is getting verbose and tedious as I further wire Win+X as right click, and many more. I briefly researched on Google but didn't see exact relevant materials. Is there a cleaner way for my usage? Thanks in advance.
Edit:
Just tried to write a reusable helper like this
```autohotkey ; passModifiers flags: ; 0x1000: pass along Ctrl ; 0x0100: pass along Alt ; 0x0010: pass along Shift ; 0x0001: pass along LWin or RWin passAlongModifiers(keys, passModifiers:=0x1111) { modifiers := "" if (passModifiers & 0x1000) && GetKeyState("Ctrl", "P") { modifiers .= "" } if (passModifiers & 0x0100) && GetKeyState("Alt", "P") { modifiers .= "!" } if (passModifiers & 0x0010) && GetKeyState("Shift", "P") { modifiers .= "+" } if (passModifiers & 0x0001) && (GetKeyState("LWin", "P") || GetKeyState("RWin", "P")) { modifiers .= "#" } Send, % modifiers . keys }
*#z::passAlongModifiers("{LButton}", 0x1110) ```
Used the old-school option flag pattern instead of 4 separate boolean parameters as AHK doesn't support calling myFunc(b:3) when the function signature is like myFunc(a:=1, b:=2) (?) Correct me if wrong. And used 0x instead of 0b because AHK doesn't support binary literals.
Apart from the minor notes, it seems to work as I intended. Any better way still?
submitted by 9xpe5i to AutoHotkey [link] [comments]

LCD Arduino project Display Heart Rate

LCD Arduino project brief introduction
Some time ago, I found a heart rate sensor module MAX30100 in shopping online. This module can collect blood oxygen and heart rate data of users, which is also simple and convenient to use.
According to the data, I found that there are libraries of MAX30100 in the Arduino library files. That is to say, if I use the communication between LCD Arduino and MAX30100, I can directly call the Arduino library files without having to rewrite the driver files. This is a good thing, so I bought the module of MAX30100.
I decided to use Arduino to verify the heart rate and blood oxygen collection function of MAX30100. With STONE TFT LCD screen for monitoring blood pressure.
Note: this module by default only with 3.3 V level MCU communications, because it defaults to using IIC pin pull up the resistance of 4.7 K to 1.8 V, so there is no communication with the Arduino by default, if you want to commune with the Arduino and need two 4.7 K of the IIC pin pull-up resistor connected to the VIN pin, these contents will be introduced in the back of the chapter.

Functional assignments

Before starting this project, I thought about some simple features:
• Heart rate data and blood oxygen data were collected
• Heart rate and blood oxygen data are displayed through an LCD screen
These are the only two features, but if we want to implement it, we need to do more thinking:
• What master MCU is used?
• What kind of LCD display?
As we mentioned earlier, we use Arduino for the MCU, but this is an LCD Arduino project, so we need to choose the appropriate LCD display module. I plan to use the LCD display screen with a serial port. I have a STONE STVI070WT-01 displayer here, but if Arduino needs to communicate with it, MAX3232 is needed to do the level conversion.
Then the basic electronic materials are determined as follows:
  1. Arduino Mini Pro development board
  2. MAX30100 heart rate and blood oxygen sensor module
  3. STONE STVI070WT-01 LCD serial port display module
  4. MAX3232 module

Hardware Introduction

MAX30100

The MAX30100 is an integrated pulse oximetry and heart rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals. The MAX30100 operates from 1.8V and 3.3V power supplies and can be powered down through software with negligible standby current, permitting the power supply to remain connected at all times.

Applications

● Wearable Devices
● Fitness Assistant Devices
● Medical Monitoring Devices

Benefits and Features

1、Complete Pulse Oximeter and Heart-Rate SensorSolution Simplifies Design
• Integrated LEDs, Photo Sensor, and high-Performance Analog Front -End
• Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin OpticallyEnhanced System-in-Package
2、Ultra-Low-Power Operation Increases Battery Life for wearable Devices
• Programmable Sample Rate and LED Current for Power Savings
• Ultra-Low Shutdown Current (0.7µA, typ)
3、Advanced Functionality Improves Measurement Performance
• High SNR Provides Robust Motion Artifact Resilience
• Integrated Ambient Light Cancellation
• High Sample Rate Capability
• Fast Data Output Capability

Detection Principle


https://preview.redd.it/254ou0pq20a51.jpg?width=817&format=pjpg&auto=webp&s=2d3287e1973b328412e14c6e56f74e6f5975153e
Just press your finger against the sensor to estimate pulse oxygen saturation (SpO2) and pulse (equivalent to heartbeat).
The pulse oximeter (oximeter) is a mini-spectrometer that USES the principles of different red cell absorption spectra to analyze the oxygen saturation of the blood. This real-time and rapid measurement method is also widely used in many clinical references.
I will not introduce the MAX30100 too much, because these materials are available on the Internet. Interested friends can look up the information of this heart rate test module on the Internet, and have a deeper understanding of its detection principle.

Introduction to the STVI070WT-01 displayer

In this project, I will use the STONE STVI070WT-01 to display the heart rate and blood oxygen data.
The driver chip has been integrated inside the display screen, and there is software for users to use. Users only need to add buttons, text boxes, and other logic through the designed UI pictures, and then generate configuration files and download them into the display screen to run.
The display of STVI070WT-01 communicates with MCU through the UART RS232 signal, which means that we need to add a MAX3232 chip to convert the RS232 signal into a TTL signal so that we can communicate with Arduino MCU.

https://preview.redd.it/kyyv3hou20a51.jpg?width=749&format=pjpg&auto=webp&s=512b7285eb763e518a85d0b172dabc08b15cab6a
If you are not sure how to use the MAX3232, please refer to the following pictures:

https://preview.redd.it/5laiqsxw20a51.jpg?width=653&format=pjpg&auto=webp&s=126fb57d5171d942046277896e1552995df0ce13
If you think the level conversion is too troublesome, you can choose other types of displayers of STONE Tech, some of which can directly output uart-TTL signal.
The official website has detailed information and introduction:
https://www.stoneitech.com/
If you need video tutorials and tutorials to use, you can also find it on the official website.

https://preview.redd.it/0rkfwxk530a51.jpg?width=867&format=pjpg&auto=webp&s=32803906927fff48bb8fbc1b0a7c073cfe54c5e5

Development steps

Three steps of STONE display screen development:
• Design the display logic and button logic with STONE TOOL software, and download the design file to the display module.
• MCU communicates with the STONE LCD display module through the serial port.
• With the data obtained in step 2, the MCU does other actions.

STONE TOOL software installation

Download the latest version of the STONE TOOL software (currently TOOL2019) from the website, and install it.
After the software is installed, the following interface will be opened:

https://preview.redd.it/evuct2w630a51.jpg?width=848&format=pjpg&auto=webp&s=201d40fdb81e2c4fd229992daf15501f2cb177a0
Click the "File" button in the upper left corner to create a new project, which we will discuss later.

LCD Arduino

Arduino is an open-source electronic prototype platform that is easy to use and easy to use. It includes the hardware part (various development boards that conform to the Arduino specification) and the software part (Arduino IDE and related development kits).
The hardware part (or development board) consists of a microcontroller (MCU), Flash memory (Flash), and a set of universal input/output interfaces (GPIO), which you can think of as a microcomputer motherboard.
The software part is mainly composed of Arduino IDE on PC, related board-level support package (BSP) and rich third-party function library. With the Arduino IDE, you can easily download the BSP associated with your development board and the libraries you need to write your programs.
Arduino is an open-source platform. So far, there have been many models and many derived controllers, including Arduino Uno, Arduino Nano, Arduino Yun and so on. In addition, the Arduino IDE now not only supports the Arduino series development boards but also adds support for popular development boards such as Intel Galileo and NodeMCU by introducing BSP.
Arduino senses the environment through a variety of sensors, controlling lights, motors and other devices to feedback and influence the environment. The microcontroller on the board can be programmed with an Arduino programming language, compiled into binaries, and burned into the microcontroller. Programming for Arduino is implemented with the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). Arduino-based projects can contain Arduino only, as well as Arduino and other software running on PC, and they communicate with each other (such as Flash, Processing, MaxMSP).

HMI for Arduino serial display TFT LCD project development environment

The Arduino development environment is the Arduino IDE, which can be downloaded from the Internet.
Log into the official website of Arduino and download the software
https://www.arduino.cc/en/Main/Software?setlang=cn
After installing the Arduino IDE, the following interface will appear when you open the software:

https://preview.redd.it/2ajmkke830a51.jpg?width=567&format=pjpg&auto=webp&s=56dc9dd01c98b231c782ef94d24a9f620c4897b3
The Arduino IDE creates two functions by default: the setup function and the loop function.
There are many Arduino introductions on the Internet. If you don't understand something, you can go to the Internet to find it.

LCD Arduino Project implementation process

hardware connection

To ensure that the next step in writing code goes smoothly, we must first determine the reliability of the hardware connection.
Only four pieces of hardware were used in this project:
  1. Arduino Mini pro-development board
  2. STONE STVI070WT-01 TFT-LCD display screen
  3. MAX30100 heart rate and blood oxygen sensor
  4. MAX3232 (rs232-> TTL)
The Arduino Mini Pro development board and STVI070WT-01 TFT-LCD display screen are connected through UART, which requires level conversion through MAX3232, and then the Arduino Mini Pro development board and MAX30100 module are connected through IIC interface. After thinking clearly, we can draw the following wiring picture:

https://preview.redd.it/w2e5c9ha30a51.jpg?width=769&format=pjpg&auto=webp&s=95129db838d6c358e986c88a4d1348f4783cd0ab
https://preview.redd.it/eom4wiia30a51.jpg?width=1091&format=pjpg&auto=webp&s=ff56c3afaf063d7785a5b85ba283532be0dd896e
Make sure there are no errors in the hardware connection and proceed to the next step.

STONE TFT LCD user interface design

First of all, we need to design a UI display image, which can be designed by PhotoShop or other image design tools. After designing the UI display image, save the image in JPG format.
Open the software STONE TOOL 2019 and create a new project:

https://preview.redd.it/sqjii2mc30a51.jpg?width=1004&format=pjpg&auto=webp&s=12f0a87d6c2ca8decaff241d5a0b50a3a1aece89
https://preview.redd.it/4ta8cdlc30a51.jpg?width=871&format=pjpg&auto=webp&s=b31ac5e612a2c809e29f63974a04ba25bff83788
Remove the image that was loaded by default in the new project, and add the UI image that we designed.
Add the text display component, design the display digit and decimal point, get the storage location of the text display component in the displayer.
The effect is as follows:

https://preview.redd.it/2mfqapoe30a51.jpg?width=1335&format=pjpg&auto=webp&s=aacfa0fde88defacd127ea9d9d27ab006ab618dd
Text display component address:
• Connection sta : 0x0008
• Heart rate : 0x0001
• Blood oxygen : 0x0005
The main contents of the UI interface are as follows:
• Connection status
• Heart rate display
• Blood oxygen showed

Generate configuration file

Once the UI design is complete, the configuration file can be generated and downloaded to the STVI070WT-01 displaye.

First, perform step 1, then insert the USB flash drive into the computer, and the disk symbol will be displayed. Then click "Download to u-disk" to Download the configuration file to the USB flash drive, and then insert the USB flash drive into STVI070WT-01 to complete the upgrade.

MAX30100

MAX30100 communicates via IIC. Its working principle is that the ADC value of heart rate can be obtained through infrared led irradiation. The MAX30100 register can be divided into five categories: state register, FIFO, control register, temperature register, and ID register. The temperature register reads the temperature value of the chip to correct the deviation caused by the temperature. The ID register can read the chip's ID number.

https://preview.redd.it/221fq8vg30a51.jpg?width=848&format=pjpg&auto=webp&s=43e93284ac35cf1944a77d79ff9a2f662e540c7e

MAX30100 is connected with the Arduino Mini Pro development board through the IIC communication interface. Because there are ready-made MAX30100 library files in the Arduino IDE, we can read the heart rate and blood oxygen data without studying the registers of MAX30100.
For those who are interested in exploring the MAX30100 register, see the MAX30100 Datasheet.

Modify the MAX30100 IIC pull-up resistor

It should be noted that the 4.7k pull-up resistance of the IIC pin of MAX30100 module is connected to 1.8v, which is not a problem in theory. However, the communication logic level of the Arduino IIC pin is 5V, so it cannot communicate with Arduino without changing the hardware of the MAX30100 module.Direct communication is possible if the MCU is STM32 or another 3.3v logic level MCU.
Therefore, the following changes need to be made:

https://preview.redd.it/jti57usl30a51.jpg?width=521&format=pjpg&auto=webp&s=c56b1b1a8294d60a8f9e931e411305f68c5c5559
Remove the three 4.7k resistors marked in the picture with an electric soldering iron. Then weld two resistors of 4.7k at the pins of SDA and SCL to VIN, so that we can communicate with Arduino.

Arduino serial display LCD

Open the Arduino IDE and find the following buttons:

https://preview.redd.it/990d3bdp30a51.jpg?width=853&format=pjpg&auto=webp&s=24136c385601b69d5afc67842358b102373277ef
Search for "MAX30100" to find two libraries for MAX30100, then click download and install.

https://preview.redd.it/4n167pbv30a51.jpg?width=933&format=pjpg&auto=webp&s=cef50833667bae3f30ac94f5a48b43795b779845
After the installation, you can find the Demo of MAX30100 in the LIB library folder of LCD Arduino:

https://preview.redd.it/rn05xgvw30a51.jpg?width=911&format=pjpg&auto=webp&s=3709bc7c5be36ebdd14c01cb0b7c1933953425b0
Double-click the file to open it.

https://preview.redd.it/q6fqylky30a51.jpg?width=819&format=pjpg&auto=webp&s=8073917be374a72bef2977b4b11ccb2b56fa944e
This Demo can be directly tested. If the hardware connection is ok, you can download the code compilation into the Arduino development board and see the data of MAX30100 in the serial debugging tool.
The complete code is as follows: /*
Arduino-MAX30100 oximetry / heart rate integrated sensor library
Copyright (C) 2016 OXullo Intersecans
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include
#include "MAX30100_PulseOximeter.h"
#define REPORTING_PERIOD_MS 1000
// PulseOximeter is the higher level interface to the sensor
// it offers:
// * beat detection reporting
// * heart rate calculation
// * SpO2 (oxidation level) calculation
PulseOximeter pox;
uint32_t tsLastReport = 0;
// Callback (registered below) fired when a pulse is detected
void onBeatDetected()
{
Serial.println("Beat!");
}
void setup()
{
Serial.begin(115200);
Serial.print("Initializing pulse oximeter..");
// Initialize the PulseOximeter instance
// Failures are generally due to an improper I2C wiring, missing power supply
// or wrong target chip
if (!pox.begin()) {
Serial.println("FAILED");
for(;;);
} else {
Serial.println("SUCCESS");
}
// The default current for the IR LED is 50mA and it could be changed
// by uncommenting the following line. Check MAX30100_Registers.h for all the
// available options.
// pox.setIRLedCurrent(MAX30100_LED_CURR_7_6MA);
// Register a callback for the beat detection
pox.setOnBeatDetectedCallback(onBeatDetected);
}
void loop()
{
// Make sure to call update as fast as possible
pox.update();
// Asynchronously dump heart rate and oxidation levels to the serial
// For both, a value of 0 means "invalid"
if (millis() - tsLastReport > REPORTING_PERIOD_MS) {
Serial.print("Heart rate:");
Serial.print(pox.getHeartRate());
Serial.print("bpm / SpO2:");
Serial.print(pox.getSpO2());
Serial.println("%");
tsLastReport = millis();
}
}
📷
This code is very simple, I believe you can understand it at a glance. I have to say that the modular programming of Arduino is very convenient, and I don't even need to understand how the driver code of Uart and IIC is implemented.
Of course, the above code is an official Demo, and I still need to make some changes to display the data to STONE's displayer.

Display data to the STONE display through Arduino LCD

First, we need to get the address of the component that displays the heart rate and blood oxygen data in STONE's displayer:
In my project, the address is as follows:
Heart rate display component address: 0x0001
Address of blood oxygen display module: 0x0005
Sensor connection status address: 0x0008
If you need to change the display content in the corresponding space, you can change the display content by sending data to the corresponding address of the display screen through the serial port of Arduino.
The modified code is as follows:
/*
Arduino-MAX30100 oximetry / heart rate integrated sensor library
Copyright (C) 2016 OXullo Intersecans
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include
#include "MAX30100_PulseOximeter.h"
#define REPORTING_PERIOD_MS 1000
#define Heart_dis_addr 0x01
#define Sop2_dis_addr 0x05
#define connect_sta_addr 0x08
unsigned char heart_rate_send[8]= {0xA5, 0x5A, 0x05, 0x82,\
0x00, Heart_dis_addr, 0x00, 0x00};
unsigned char Sop2_send[8]= {0xA5, 0x5A, 0x05, 0x82, 0x00, \
Sop2_dis_addr, 0x00, 0x00};
unsigned char connect_sta_send[8]={0xA5, 0x5A, 0x05, 0x82, 0x00, \
connect_sta_addr,0x00, 0x00};
// PulseOximeter is the higher level interface to the sensor
// it offers:
// * beat detection reporting
// * heart rate calculation
// * SpO2 (oxidation level) calculation
PulseOximeter pox;
uint32_t tsLastReport = 0;
// Callback (registered below) fired when a pulse is detected
void onBeatDetected()
{
// Serial.println("Beat!");
}
void setup()
{
Serial.begin(115200);
// Serial.print("Initializing pulse oximeter..");
// Initialize the PulseOximeter instance
// Failures are generally due to an improper I2C wiring, missing power supply
// or wrong target chip
if (!pox.begin()) {
// Serial.println("FAILED");
// connect_sta_send[7]=0x00;
// Serial.write(connect_sta_send,8);
for(;;);
} else {
connect_sta_send[7]=0x01;
Serial.write(connect_sta_send,8);
// Serial.println("SUCCESS");
}
// The default current for the IR LED is 50mA and it could be changed
// by uncommenting the following line. Check MAX30100_Registers.h for all the
// available options.
pox.setIRLedCurrent(MAX30100_LED_CURR_7_6MA);
// Register a callback for the beat detection
pox.setOnBeatDetectedCallback(onBeatDetected);
}
void loop()
{
// Make sure to call update as fast as possible
pox.update();
// Asynchronously dump heart rate and oxidation levels to the serial
// For both, a value of 0 means "invalid"
if (millis() - tsLastReport > REPORTING_PERIOD_MS) {
// Serial.print("Heart rate:");
// Serial.print(pox.getHeartRate());
// Serial.print("bpm / SpO2:");
// Serial.print(pox.getSpO2());
// Serial.println("%");
heart_rate_send[7]=(uint32_t)pox.getHeartRate();
Serial.write(heart_rate_send,8);
Sop2_send[7]=pox.getSpO2();
Serial.write(Sop2_send,8);
tsLastReport = millis();
}
}
Compile the code, download it to the Arduino serial display LCD development board, and you're ready to start testing.
We can see that when the fingers leave the MAX30100, the heart rate and blood oxygen display 0. Place your finger on the MAX30100 collector to see your heart rate and blood oxygen levels in real-time.

LCD Arduino project effect can be seen in the following picture:


https://preview.redd.it/k9u0jtg040a51.jpg?width=510&format=pjpg&auto=webp&s=1e9994109a072807a802eb1179b874f727aeff5a
https://preview.redd.it/0ow2lfg040a51.jpg?width=576&format=pjpg&auto=webp&s=b0f5f6ac073894c8b0c033549fce79fac1c90bc3
submitted by Tamesliu to arduino [link] [comments]

LCD Arduino + STONE HMI + Display Heart Rate

LCD Arduino project brief introduction

Some time ago, I found a heart rate sensor module MAX30100 in shopping online. This module can collect blood oxygen and heart rate data of users, which is also simple and convenient to use.
According to the data, I found that there are libraries of MAX30100 in the Arduino library files. That is to say, if I use the communication between LCD Arduino and MAX30100, I can directly call the Arduino library files without having to rewrite the driver files. This is a good thing, so I bought the module of MAX30100.
I decided to use Arduino to verify the heart rate and blood oxygen collection function of MAX30100. With STONE TFT LCD screen for monitoring blood pressure.

https://preview.redd.it/fbm2i8e32o251.jpg?width=328&format=pjpg&auto=webp&s=20329c7187f3fdf628106e923453fdf588fe69ab
Note: this module by default only with 3.3 V level MCU communications, because it defaults to using IIC pin pull up the resistance of 4.7 K to 1.8 V, so there is no communication with the Arduino by default, if you want to commune with the Arduino and need two 4.7 K of the IIC pin pull-up resistor connected to the VIN pin, these contents will be introduced in the back of the chapter.

Functional assignments

Before starting this project, I thought about some simple features:
• Heart rate data and blood oxygen data were collected
• Heart rate and blood oxygen data are displayed through an LCD screen
These are the only two features, but if we want to implement it, we need to do more thinking:
• What master MCU is used?
• What kind of LCD display?
As we mentioned earlier, we use Arduino for the MCU, but this is an LCD Arduino project, so we need to choose the appropriate LCD display module. I plan to use the LCD display screen with a serial port. I have a STONE STVI070WT-01 displayer here, but if Arduino needs to communicate with it, MAX3232 is needed to do the level conversion.
Then the basic electronic materials are determined as follows:
  1. Arduino Mini Pro development board
  2. MAX30100 heart rate and blood oxygen sensor module
  3. STONE STVI070WT-01 LCD serial port display module
  4. MAX3232 module

Hardware Introduction

MAX30100

The MAX30100 is an integrated pulse oximetry and heart rate monitor sensor solution. It combines two LEDs, a photodetector, optimized optics, and low-noise analog signal processing to detect pulse oximetry and heart-rate signals. The MAX30100 operates from 1.8V and 3.3V power supplies and can be powered down through software with negligible standby current, permitting the power supply to remain connected at all times.

Applications

● Wearable Devices
● Fitness Assistant Devices
● Medical Monitoring Devices

Benefits and Features

1、Complete Pulse Oximeter and Heart-Rate SensorSolution Simplifies Design
• Integrated LEDs, Photo Sensor, and high-Performance Analog Front -End
• Tiny 5.6mm x 2.8mm x 1.2mm 14-Pin OpticallyEnhanced System-in-Package
2、Ultra-Low-Power Operation Increases Battery Life for wearable Devices
• Programmable Sample Rate and LED Current for Power Savings
• Ultra-Low Shutdown Current (0.7µA, typ)
3、Advanced Functionality Improves Measurement Performance
• High SNR Provides Robust Motion Artifact Resilience
• Integrated Ambient Light Cancellation
• High Sample Rate Capability
• Fast Data Output Capability

Detection Principle


https://preview.redd.it/kgu72wk52o251.jpg?width=817&format=pjpg&auto=webp&s=0b44a5b4b476c50c1cbd311f048313777d06cabb
Just press your finger against the sensor to estimate pulse oxygen saturation (SpO2) and pulse (equivalent to heartbeat).
The pulse oximeter (oximeter) is a mini-spectrometer that USES the principles of different red cell absorption spectra to analyze the oxygen saturation of the blood. This real-time and rapid measurement method is also widely used in many clinical references.
I will not introduce the MAX30100 too much, because these materials are available on the Internet. Interested friends can look up the information of this heart rate test module on the Internet, and have a deeper understanding of its detection principle.

Introduction to the STVI070WT-01 displayer

In this project, I will use the STONE STVI070WT-01 to display the heart rate and blood oxygen data.
The driver chip has been integrated inside the display screen, and there is software for users to use. Users only need to add buttons, text boxes and other logic through the designed UI pictures, and then generate configuration files and download them into the display screen to run.
The display of STVI070WT-01 communicates with MCU through the UART RS232 signal, which means that we need to add a MAX3232 chip to convert the RS232 signal into a TTL signal so that we can communicate with Arduino MCU.

https://preview.redd.it/oacuof082o251.jpg?width=749&format=pjpg&auto=webp&s=d1427adf34689c8a433a2af71c494f7698e4baf8
If you are not sure how to use the MAX3232, please refer to the following pictures:

https://preview.redd.it/u39qtog92o251.jpg?width=653&format=pjpg&auto=webp&s=04cf458bcebcd27ba09f36903e20e7ebe1aaa6f9
If you think the level conversion is too troublesome, you can choose other types of displayers of STONE Tech, some of which can directly output uart-TTL signal.
The official website has detailed information and introduction:
https://www.stoneitech.com/
If you need video tutorials and tutorials to use, you can also find it on the official website.

Development steps

Three steps of STONE display screen development:
• Design the display logic and button logic with STONE TOOL software, and download the design file to the display module.
• MCU communicates with the STONE LCD display module through the serial port.
• With the data obtained in step 2, the MCU does other actions.

STONE TOOL software installation

Download the latest version of the STONE TOOL software (currently TOOL2019) from the website, and install it.
After the software is installed, the following interface will be opened:

https://preview.redd.it/ryc7qjkd2o251.jpg?width=848&format=pjpg&auto=webp&s=72f674b6a2b653562a31735f103aecf2df16199d
Click the "File" button in the upper left corner to create a new project, which we will discuss later.

LCD Arduino

Arduino is an open-source electronic prototype platform that is easy to use and easy to use. It includes the hardware part (various development boards that conform to the Arduino specification) and the software part (Arduino IDE and related development kits).
The hardware part (or development board) consists of a microcontroller (MCU), Flash memory (Flash), and a set of universal input/output interfaces (GPIO), which you can think of as a microcomputer motherboard.
The software part is mainly composed of Arduino IDE on PC, related board-level support package (BSP) and rich third-party function library. With the Arduino IDE, you can easily download the BSP associated with your development board and the libraries you need to write your programs.
Arduino is an open-source platform. So far, there have been many models and many derived controllers, including Arduino Uno, Arduino Nano, Arduino Yun and so on. In addition, the Arduino IDE now not only supports the Arduino series development boards but also adds support for popular development boards such as Intel Galileo and NodeMCU by introducing BSP.
Arduino senses the environment through a variety of sensors, controlling lights, motors and other devices to feedback and influence the environment. The microcontroller on the board can be programmed with an Arduino programming language, compiled into binaries, and burned into the microcontroller. Programming for Arduino is implemented with the Arduino programming language (based on Wiring) and the Arduino development environment (based on Processing). Arduino-based projects can contain Arduino only, as well as Arduino and other software running on PC, and they communicate with each other (such as Flash, Processing, MaxMSP).

HMI for Arduino serial display TFT LCD project development environment

The Arduino development environment is the Arduino IDE, which can be downloaded from the Internet.
Log into the official website of Arduino and download the software
https://www.arduino.cc/en/Main/Software?setlang=cn
After installing the Arduino IDE, the following interface will appear when you open the software:

https://preview.redd.it/2fcfnrkg2o251.jpg?width=567&format=pjpg&auto=webp&s=9b6664d15fb99c31ee91c49be56d9eb9e17e04de
The Arduino IDE creates two functions by default: the setup function and the loop function.
There are many Arduino introductions on the Internet. If you don't understand something, you can go to the Internet to find it.

LCD Arduino Project implementation process

hardware connection

To ensure that the next step in writing code goes smoothly, we must first determine the reliability of the hardware connection.
Only four pieces of hardware were used in this project:
  1. Arduino Mini pro development board
  2. STONE STVI070WT-01 tft-lcd display screen
  3. MAX30100 heart rate and blood oxygen sensor
  4. MAX3232 (rs232-> TTL)
The Arduino Mini Pro development board and STVI070WT tft-lcd display screen are connected through UART, which requires level conversion through MAX3232, and then the Arduino Mini Pro development board and MAX30100 module are connected through IIC interface.After thinking clearly, we can draw the following wiring picture:

https://preview.redd.it/xkpv7bxi2o251.jpg?width=769&format=pjpg&auto=webp&s=b3658c7c455ba97c6f3a961e34ed020059201b8b

https://preview.redd.it/zobnoatl2o251.jpg?width=1091&format=pjpg&auto=webp&s=2263d1d5a6d208b6e9c1110334971a1d34ed742c
Make sure there are no errors in the hardware connection and proceed to the next step.

STONE TFT LCD user interface design

First of all, we need to design a UI display image, which can be designed by PhotoShop or other image design tools. After designing the UI display image, save the image in JPG format.
Open the software STONE TOOL 2019 and create a new project:

https://preview.redd.it/ou27uc4o2o251.jpg?width=1004&format=pjpg&auto=webp&s=e559c55a3d4fb014fc35dd94bca4d7a52938c87f

https://preview.redd.it/j7mkexnp2o251.jpg?width=871&format=pjpg&auto=webp&s=eb80865fd5efe45a5b015790f0fd0c02f07ca069
Remove the image that was loaded by default in the new project, and add the UI image that we designed.
Add the text display component, design the display digit and decimal point, get the storage location of the text display component in the displayer.
The effect is as follows:

https://preview.redd.it/y7333lor2o251.jpg?width=1335&format=pjpg&auto=webp&s=501576a9d57e92b1435bc25406612a0f758038a5
Text display component address:
• Connection sta : 0x0008
• Heart rate : 0x0001
• Blood oxygen : 0x0005
The main contents of the UI interface are as follows:
• Connection status
• Heart rate display
• Blood oxygen showed

Generate configuration file

Once the UI design is complete, the configuration file can be generated and downloaded to the STVI070WT-01 displaye.

https://preview.redd.it/c94grplt2o251.jpg?width=606&format=pjpg&auto=webp&s=ab0a7306791341599fbb874c63638f1066e5f1d9
First, perform step 1, then insert the USB flash drive into the computer, and the disk symbol will be displayed. Then click "Download to u-disk" to Download the configuration file to the USB flash drive, and then insert the USB flash drive into STVI070WT-01 to complete the upgrade.

MAX30100

MAX30100 communicates via IIC. Its working principle is that the ADC value of heart rate can be obtained through infrared led irradiation. The MAX30100 register can be divided into five categories: state register, FIFO, control register, temperature register, and ID register. The temperature register reads the temperature value of the chip to correct the deviation caused by the temperature. The ID register can read the chip's ID number.

https://preview.redd.it/dfomjb1z2o251.jpg?width=848&format=pjpg&auto=webp&s=911b174be98448c64002c1a24fa6528ce56ae3b7
MAX30100 is connected with the Arduino Mini Pro development board through the IIC communication interface. Because there are ready-made MAX30100 library files in the Arduino IDE, we can read the heart rate and blood oxygen data without studying the registers of MAX30100.
For those who are interested in exploring the MAX30100 register, see the MAX30100 Datasheet.

Modify the MAX30100 IIC pull-up resistor

It should be noted that the 4.7k pull-up resistance of the IIC pin of MAX30100 module is connected to 1.8v, which is not a problem in theory. However, the communication logic level of the Arduino IIC pin is 5V, so it cannot communicate with Arduino without changing the hardware of the MAX30100 module.Direct communication is possible if the MCU is STM32 or another 3.3v logic level MCU.
Therefore, the following changes need to be made:

https://preview.redd.it/l5cimq013o251.jpg?width=521&format=pjpg&auto=webp&s=9fc29401ed402b9bf623c4f8e474336c8050fae8
Remove the three 4.7k resistors marked in the picture with an electric soldering iron. Then weld two resistors of 4.7k at the pins of SDA and SCL to VIN, so that we can communicate with Arduino.

Arduino serial display LCD

Open the Arduino IDE and find the following buttons:

https://preview.redd.it/w9mska373o251.jpg?width=853&format=pjpg&auto=webp&s=fe0ee068c64ce109028dab4f5898335ded02c82e
Search for "MAX30100" to find two libraries for MAX30100, then click download and install.

https://preview.redd.it/pqlihp9a3o251.jpg?width=933&format=pjpg&auto=webp&s=493965c54d1cc755a0dd2ac98ad6100cf7c93948
After the installation, you can find the Demo of MAX30100 in the LIB library folder of LCD Arduino:

https://preview.redd.it/srk2g83c3o251.jpg?width=911&format=pjpg&auto=webp&s=da696328a0a198c0ee41a17a7811024d36a153ea
Double-click the file to open it.

https://preview.redd.it/lc8z3gtd3o251.jpg?width=819&format=pjpg&auto=webp&s=bbac5eb529e4279792c899d738ebdb0fa9263c54
This Demo can be directly tested. If the hardware connection is ok, you can download the code compilation into the Arduibo development board and see the data of MAX30100 in the serial debugging tool.
The complete code is as follows:
/*
Arduino-MAX30100 oximetry / heart rate integrated sensor library
Copyright (C) 2016 OXullo Intersecans
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include
#include "MAX30100_PulseOximeter.h"
#define REPORTING_PERIOD_MS 1000
// PulseOximeter is the higher level interface to the sensor
// it offers:
// * beat detection reporting
// * heart rate calculation
// * SpO2 (oxidation level) calculation
PulseOximeter pox;
uint32_t tsLastReport = 0;
// Callback (registered below) fired when a pulse is detected
void onBeatDetected()
{
Serial.println("Beat!");
}
void setup()
{
Serial.begin(115200);
Serial.print("Initializing pulse oximeter..");
// Initialize the PulseOximeter instance
// Failures are generally due to an improper I2C wiring, missing power supply
// or wrong target chip
if (!pox.begin()) {
Serial.println("FAILED");
for(;;);
} else {
Serial.println("SUCCESS");
}
// The default current for the IR LED is 50mA and it could be changed
// by uncommenting the following line. Check MAX30100_Registers.h for all the
// available options.
// pox.setIRLedCurrent(MAX30100_LED_CURR_7_6MA);
// Register a callback for the beat detection
pox.setOnBeatDetectedCallback(onBeatDetected);
}
void loop()
{
// Make sure to call update as fast as possible
pox.update();
// Asynchronously dump heart rate and oxidation levels to the serial
// For both, a value of 0 means "invalid"
if (millis() - tsLastReport > REPORTING_PERIOD_MS) {
Serial.print("Heart rate:");
Serial.print(pox.getHeartRate());
Serial.print("bpm / SpO2:");
Serial.print(pox.getSpO2());
Serial.println("%");
tsLastReport = millis();
}
}


https://preview.redd.it/nyuyl4zl3o251.jpg?width=552&format=pjpg&auto=webp&s=58e05bc67a250de6f7b24060290d8a0703624e30
This code is very simple, I believe you can understand it at a glance. I have to say that the modular programming of Arduino is very convenient, and I don't even need to understand how the driver code of Uart and IIC is implemented.
Of course, the above code is an official Demo, and I still need to make some changes to display the data to STONE's displayer.

Display data to the STONE display through Arduino LCD

First, we need to get the address of the component that displays the heart rate and blood oxygen data in STONE's displayer:
In my project, the address is as follows:
Heart rate display component address: 0x0001
Address of blood oxygen display module: 0x0005
Sensor connection status address: 0x0008
If you need to change the display content in the corresponding space, you can change the display content by sending data to the corresponding address of the display screen through the serial port of Arduino.
The modified code is as follows:
/*
Arduino-MAX30100 oximetry / heart rate integrated sensor library
Copyright (C) 2016 OXullo Intersecans
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include
#include "MAX30100_PulseOximeter.h"
#define REPORTING_PERIOD_MS 1000
#define Heart_dis_addr 0x01
#define Sop2_dis_addr 0x05
#define connect_sta_addr 0x08
unsigned char heart_rate_send[8]= {0xA5, 0x5A, 0x05, 0x82,\
0x00, Heart_dis_addr, 0x00, 0x00};
unsigned char Sop2_send[8]= {0xA5, 0x5A, 0x05, 0x82, 0x00, \
Sop2_dis_addr, 0x00, 0x00};
unsigned char connect_sta_send[8]={0xA5, 0x5A, 0x05, 0x82, 0x00, \
connect_sta_addr,0x00, 0x00};
// PulseOximeter is the higher level interface to the sensor
// it offers:
// * beat detection reporting
// * heart rate calculation
// * SpO2 (oxidation level) calculation
PulseOximeter pox;
uint32_t tsLastReport = 0;
// Callback (registered below) fired when a pulse is detected
void onBeatDetected()
{
// Serial.println("Beat!");
}
void setup()
{
Serial.begin(115200);
// Serial.print("Initializing pulse oximeter..");
// Initialize the PulseOximeter instance
// Failures are generally due to an improper I2C wiring, missing power supply
// or wrong target chip
if (!pox.begin()) {
// Serial.println("FAILED");
// connect_sta_send[7]=0x00;
// Serial.write(connect_sta_send,8);
for(;;);
} else {
connect_sta_send[7]=0x01;
Serial.write(connect_sta_send,8);
// Serial.println("SUCCESS");
}
// The default current for the IR LED is 50mA and it could be changed
// by uncommenting the following line. Check MAX30100_Registers.h for all the
// available options.
pox.setIRLedCurrent(MAX30100_LED_CURR_7_6MA);
// Register a callback for the beat detection
pox.setOnBeatDetectedCallback(onBeatDetected);
}
void loop()
{
// Make sure to call update as fast as possible
pox.update();
// Asynchronously dump heart rate and oxidation levels to the serial
// For both, a value of 0 means "invalid"
if (millis() - tsLastReport > REPORTING_PERIOD_MS) {
// Serial.print("Heart rate:");
// Serial.print(pox.getHeartRate());
// Serial.print("bpm / SpO2:");
// Serial.print(pox.getSpO2());
// Serial.println("%");
heart_rate_send[7]=(uint32_t)pox.getHeartRate();
Serial.write(heart_rate_send,8);
Sop2_send[7]=pox.getSpO2();
Serial.write(Sop2_send,8);
tsLastReport = millis();
}
}

Compile the code, download it to the Arduino serial display LCD development board, and you're ready to start testing.
We can see that when the fingers leave the MAX30100, the heart rate and blood oxygen display 0. Place your finger on the MAX30100 collector to see your heart rate and blood oxygen levels in real-time.

LCD Arduino project effect can be seen in the following picture:


https://preview.redd.it/lf120a5s3o251.jpg?width=510&format=pjpg&auto=webp&s=d705a9e10bac1758afc554036a31748c5f73d255
submitted by woodkiki to ArduinoProjects [link] [comments]

ERROR: device 'UUID=XXXX-XXX-XXX-XXX' not found. Skipping sfck.

It's three days that I'm trying to install ArchLinux in dual boot with OS X, and failing. OS X is booting fine, but when I try to boot Arch Linux this happens:
:: running early hook [udev] Warning: /lib/modules/5.5.13-arch1-1/modules.devname not found - ignoring Starting version 245.3-1-arch :: running hook [udev] :: Triggering uevents... Waiting 10 seconds for device /dev/disk/by-uuid/4e3de85b-6b12-48e3-a22b-1960589207ed ... ERROR: device 'UUID=4e3de85b-6b12-48e3-a22b-1960589207ed' not found. Skipping fsck. :: mounting 'UUID=4e3de85b-6b12-48e3-a22b-1960589207ed' on real root mount: /new_root: can't find UUID=4e3de85b-6b12-48e3-a22b-1960589207ed. You are now being dropped into an emergency shell. sh: can't access tty; job control turned off [rootfs ]# _ 
This shell is not even working, I can't type anything
Some background: 1 week ago succeeded to install ArchLinux in dual boot with OS X (using grub). Then, few days ago I wanted to upgrade my MacBook4.1 with an SSD. I reinstalled OS X on the SSD, partitioned the disk and installed Arch Linux following the same identical step I used before, but this time the error I showed you appeared. The shell at that time was working though.. I was able to mount the root partition manually from the shell typing "mount /dev/sdaX /new_root". and ArchLinux then was fully functional (except I had to manually mount root every time at startup). As I wasn't able to permanently fix the problem I thought that maybe the SSD itself was the problem, I put back the old HDD (sadly I wiped it so I had to reinstall everything again), followed the same usual step, the problem occurred again. I tried to fix the problem in many ways, nothing worked. Now, I'm trying to use systemd-boot instead of grub. The problem is the same but the shell doesn't work.
I reinstalled Arch Linux both using grub and systems-boot several times, trying everything I have found on the internet about this problem but nothing worked for me.
I'm definitely not an expert, I have some questions I can't answer myself and that may be helpful to solve my problem:
  1. Can the problem be related to this warning? I am not able fix it. Looking on the internet I fount that who has this warning also happens to have the same problem I have.

Warning: /lib/modules/5.5.13-arch1-1/modules.devname not found - ignoring 
  1. Since I was able to properly install Arch Linux the first time, why I'm I not able to install it now following the same identical steps from scratch? How is that even possible?
If anyone can help me it would be really appreciated! I'll post here some command output:
# disk -l
Disk /dev/sda: 149.5 GiB, 160041885696 bytes, 312581808 sectors Disk model: FUJITSU MHY2160B Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: D0FC89C2-822B-4EF3-BE02-51F982168EEC Device Start End Sectors Size Type /dev/sda1 40 409639 409600 200M EFI System /dev/sda2 409640 250409639 250000000 119.2G Apple HFS/HFS+ /dev/sda3 250409640 251679183 1269544 619.9M Apple boot /dev/sda4 251679312 251884111 204800 100M EFI System /dev/sda5 251884112 312581774 60697663 29G Linux filesystem Disk /dev/loop0: 534.78 MiB, 560738304 bytes, 1095192 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/sdb: 14.33 GiB, 15376318464 bytes, 30031872 sectors Disk model: Ultra USB 3.0 Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: gpt Disk identifier: CB8C1429-614C-4250-8EF9-3D5A0F9E5939 Device Start End Sectors Size Type /dev/sdb1 40 409639 409600 200M EFI System /dev/sdb2 411648 30029823 29618176 14.1G Microsoft basic data 
# blkid
/dev/sda5: UUID="4e3de85b-6b12-48e3-a22b-1960589207ed" BLOCK_SIZE="4096" TYPE="ext4" PARTLABEL="Root" PARTUUID="2b3f55cb-7c13-4d55-85ca-dcbe7e1330fb" /dev/sda1: LABEL_FATBOOT="EFI" LABEL="EFI" UUID="70D6-1701" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="4d0eac79-f89f-4619-9fe1-dab233c61430" /dev/sda2: UUID="ec39a965-f551-30c7-851d-0ef31ccd898f" BLOCK_SIZE="4096" LABEL="Macintosh HD" TYPE="hfsplus" PARTLABEL="Macintosh HD" PARTUUID="68a9d117-cdbc-4d88-b1a7-54f465e2cff9" /dev/sda3: UUID="d5c110dc-c968-3f2e-8f62-19d74483bf25" BLOCK_SIZE="4096" LABEL="Recovery HD" TYPE="hfsplus" PARTLABEL="Recovery HD" PARTUUID="efd8311e-9ce5-4581-9d6b-0fd695026d30" /dev/sda4: UUID="1C7E-12F5" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="Boot" PARTUUID="fb577f03-2b46-46a2-8463-0194ce373ebc" /dev/sr0: BLOCK_SIZE="2048" UUID="2020-03-01-09-32-57-00" LABEL="ARCH_202003" TYPE="iso9660" PTUUID="3372b9d9" PTTYPE="dos" /dev/loop0: TYPE="squashfs" /dev/sdb1: LABEL_FATBOOT="EFI" LABEL="EFI" UUID="67E3-17ED" BLOCK_SIZE="512" TYPE="vfat" PARTLABEL="EFI System Partition" PARTUUID="21a6a161-9443-4de1-a115-e91509d1a20a" /dev/sdb2: LABEL="Untitled" UUID="5E7B-524E" BLOCK_SIZE="512" TYPE="exfat" PARTUUID="a5064eb4-1c93-473a-aa74-01c9a567d60c" 
/etc/fstab
# Static information about the filesystems. # See fstab(5) for details. #       # /dev/sda5 UUID=4e3de85b-6b12-48e3-a22b-1960589207ed / ext4 rw,relatime 0 1 # /dev/sda4 UUID=1C7E-12F5 /boot vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 2 
#mkinitcpio -p linux
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img ==> Starting build: 5.5.13-arch1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [autodetect] -> Running build hook: [modconf] -> Running build hook: [block] -> Running build hook: [filesystems] -> Running build hook: [keyboard] -> Running build hook: [fsck] ==> Generating module dependencies ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img ==> Image generation successful ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback' -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect ==> Starting build: 5.5.13-arch1-1 -> Running build hook: [base] -> Running build hook: [udev] -> Running build hook: [modconf] -> Running build hook: [block] -> Running build hook: [filesystems] -> Running build hook: [keyboard] -> Running build hook: [fsck] ==> Generating module dependencies ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img ==> Image generation successful 
/etc/mkinitcpio.conf
# vim:set ft=sh # MODULES # The following modules are loaded before any boot hooks are # run. Advanced users may wish to specify all system modules # in this array. For instance: # MODULES=(piix ide_disk reiserfs) MODULES=() # BINARIES # This setting includes any additional binaries a given user may # wish into the CPIO image. This is run last, so it may be used to # override the actual binaries included by a given hook # BINARIES are dependency parsed, so you may safely ignore libraries BINARIES=() # FILES # This setting is similar to BINARIES above, however, files are added # as-is and are not parsed in any way. This is useful for config files. FILES=() # HOOKS # This is the most important setting in this file. The HOOKS control the # modules and scripts added to the image, and what happens at boot time. # Order is important, and it is recommended that you do not change the # order in which HOOKS are added. Run 'mkinitcpio -H ' for # help on a given hook. # 'base' is _required_ unless you know precisely what you are doing. # 'udev' is _required_ in order to automatically load modules # 'filesystems' is _required_ unless you specify your fs modules in MODULES # Examples: ## This setup specifies all modules in the MODULES setting above. ## No raid, lvm2, or encrypted root is needed. # HOOKS=(base) # ## This setup will autodetect all modules for your system and should ## work as a sane default # HOOKS=(base udev autodetect block filesystems) # ## This setup will generate a 'full' image which supports most systems. ## No autodetection is done. # HOOKS=(base udev block filesystems) # ## This setup assembles a pata mdadm array with an encrypted root FS. ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices. # HOOKS=(base udev block mdadm encrypt filesystems) # ## This setup loads an lvm2 volume group on a usb device. # HOOKS=(base udev block lvm2 filesystems) # ## NOTE: If you have /usr on a separate partition, you MUST include the # usr, fsck and shutdown hooks. HOOKS=(base udev autodetect modconf block filesystems keyboard fsck) # COMPRESSION # Use this to compress the initramfs image. By default, gzip compression # is used. Use 'cat' to create an uncompressed image. #COMPRESSION="gzip" #COMPRESSION="bzip2" #COMPRESSION="lzma" #COMPRESSION="xz" #COMPRESSION="lzop" #COMPRESSION="lz4" # COMPRESSION_OPTIONS # Additional options for the compressor #COMPRESSION_OPTIONS=() 
#bootctl status
(note here that "Boot loader sets ESP partition information" is followed by an "x", I don't know if this is normal)
System: Firmware: UEFI 1.10 (Apple 1.10) Secure Boot: disabled Setup Mode: user Current Boot Loader: Product: systemd-boot 244.3-1-arch Features: ✓ Boot counting ✓ Menu timeout control ✓ One-shot menu timeout control ✓ Default entry control ✓ One-shot entry control ✓ Support for XBOOTLDR partition ✓ Support for passing random seed to OS ✗ Boot loader sets ESP partition information ESP: n/a File: └─/EFI/BOOT/loader.efi Random Seed: Passed to OS: no System Token: set Exists: yes Available Boot Loaders on ESP: ESP: /boot (/dev/disk/by-partuuid/fb577f03-2b46-46a2-8463-0194ce373ebc) File: └─/EFI/systemd/systemd-bootx64.efi (systemd-boot 245.3-1-arch) File: └─/EFI/BOOT/BOOTX64.EFI (systemd-boot 245.3-1-arch) Boot Loaders Listed in EFI Variables: Title: Linux Boot Manager ID: 0x0001 Status: active, boot-order Partition: /dev/disk/by-partuuid/fb577f03-2b46-46a2-8463-0194ce373ebc File: └─/EFI/systemd/systemd-bootx64.efi Title: Linux Boot Manager ID: 0x0000 Status: active, boot-order Partition: /dev/disk/by-partuuid/1e4f2b9d-06d0-4a35-ba21-031550f9f13a File: └─/EFI/systemd/systemd-bootx64.efi Title: Mac OS X ID: 0x0081 Status: active Partition: /dev/disk/by-partuuid/000013ba-56fb-0000-204c-0000b5320000 File: └─/EFI/APPLE/FIRMWARE/SmcFlasher.efi Boot Loader Entries: $BOOT: /boot (/dev/disk/by-partuuid/fb577f03-2b46-46a2-8463-0194ce373ebc) Default Boot Loader Entry: title: Arch Linux id: arch.conf source: /boot/loadeentries/arch.conf linux: /vmlinuz-linux initrd: /intel-ucode.img /initramfs-linux-lts.img options: root=UUID=4e3de85b-6b12-48e3-a22b-1960589207ed rw 
/boot/loadeentries/arch.conf
title Arch Linux linux /vmlinuz-linux initrd /intel-ucode.img initrd /initramfs-linux-lts.img options root=UUID=4e3de85b-6b12-48e3-a22b-1960589207ed rw 
/boot/loadeloader.conf
#timeout 3 #console-mode keep #default 8bdd93e1ff4b43aa837997d9f4479520-* default arch timeout 4 console-mode max editor no 
# tree /boot
/boot ├── 8bdd93e1ff4b43aa837997d9f4479520 ├── EFI │ ├── BOOT │ │ └── BOOTX64.EFI │ ├── Linux │ └── systemd │ └── systemd-bootx64.efi ├── initramfs-linux-fallback.img ├── initramfs-linux.img ├── initramfs-linux-lts-fallback.img ├── initramfs-linux-lts.img ├── intel-ucode.img ├── loader │ ├── entries │ │ └── arch.conf │ ├── loader.conf │ └── random-seed ├── vmlinuz-linux └── vmlinuz-linux-lts 7 directories, 12 files 
submitted by user_231578 to archlinux [link] [comments]

Не проходит урон в шутерах?? Leatrix Latency Fix вам поможет. Как установить? Ответ в этом видео Part 2 Infinity Chinese Miracle-2 MTK V2.00 Latest Setup Download I bought a $48 GTX 1050 Ti on Wish.com - YouTube Как установить драйвер для видеокарты Nvidia

Monday, 19 December 2016. 0x0001 Binary Options Binary Options Broker Hoewel binêre opsies is 'n relatief nuwe manier om handel te dryf in die aandelemark en ander finansiële markte, dit i... As binary options trading continues to gain prominence as an alternative investment and hedging vehicle, the number of binary options brokers entering the business, to take a slice of the market, has grown manifold. You also asked about the 'new database sort order' - you can find that under menu option Tools > Options > 'General' tab > see the 'new database sort order' dropdown box Compare ... A notation like this is very often used to store information about multiple options with 2 possible states for each option (on, off). You define it usually this way: #define OPTION_A 0x0001 // binary: 0000 0001 #define OPTION_B 0x0002 // 0000 0010 #define OPTION_C 0x0004 // 0000 0100 #define OPTION_D 0x0008 // 0000 1000 #define OPTION_E 0x0010 // 0001 0000 e.g. OPTION_B and OPTION_E -> ON ... 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, ... etc. If the documentation says " You can combine these using the bitwise OR function ." You may not even know that you are using binary flags. Well, what we get are binary literals that evaluate fully at compile time already, because of the "constexpr" above. The above uses a hard-coded int return type. I think one could even make it depend on the length of the binary string. It's using the following features, for anyone interested: Generalized Constant Expressions. Variadic Templates. Tuesday, 7 May 2019. 0x0001 binário opções The binary numeral system uses the number 2 as its base (radix). As a base-2 numeral system, it consists of only two numbers: 0 and 1. While it has been applied in ancient Egypt, China and India for different purposes, the binary system has become the language of electronics and computers in the modern world. This is the most efficient system to detect an electric signal’s off (0) and on (1 ... Gamultiobj binary options / Bogleheads guide to investing epub files; Best binary option systems; Binary options trading strategy mmxiii; Finexo review Forex peace army scam; Hc invest group salt / Ruffer investment company annual report 2020; Olymptrade trade; 3 legged stool investing; Eike rachor investment ; Mongolia set for non mining investment and local impact; Binary options support and ... 0x0001 binary options February 05, 2018 Get link; Facebook; Twitter; Pinterest; Email; Other Apps; Retorno de 0x0001 Em Binário Erro 0x0001 Em Binary mostra que as atualizações do Windows falharam e há inúmeras razões para o erro de pop-up que pode ser corrompido atualizar componentes do Windows, atualizações anteriores que falharam e causou corrupção junto com os arquivos do sistema ...

[index] [18008] [2564] [27363] [26654] [15585] [20410] [19729] [18629] [10244] [10753]

Не проходит урон в шутерах?? Leatrix Latency Fix вам поможет. Как установить? Ответ в этом видео

This video is unavailable. Watch Queue I have been seeing a lot of ads on YouTube for the website Wish.com lately and it made me wonder: Is it still a scam? I bought a $48 GTX 1050 ti, and there i... Best Binary Options Strategy 2020 - 2 Minute Strategy LIVE TRAINING! - Duration: 43:42. BLW Online Trading Recommended for you. 43:42 🔧Boost FPS & Fix Lag In All Games For Low End PC New ... InfinityBox_install_CM2MT2_v2.00 Link https://goo.gl/c3LGfA subscribe for know how do it and file link also infinity cm2 mtk v2 with my mod orignal link http...

http://binaryoptiontrade.preemuncirlotilas.cf